How to apply UV DTF Transfers
UV DECALS ARE PERMANENT – PLEASE BE VERY CAREFUL WITH PLACEMENT!
UV-DTF Adhesive Decal Application Instructions
They can be applied to the following: glass, metal, plastic, ceramics, wood, leather, paper, cardboard.
- Clean the surface you intend to apply your decal.
For non-porous surfaces, you can use alcohol, or window cleaner with a lint free rag. - Cut your decal into a manageable size. Trim off any excess and cut as close to the overall printed design as possible (keeping the general shape of the wrap/decal).
- Make sure the transfer print is secure to the top film by laying it on a flat surface and rub with firm pressure using a squeegee tool, credit card or your fingertip.
- Remove your decal backing: Place face down peel straight back or gently roll the backing paper away from the film and image.
- Apply the decal: Position decal onto the surface, rub with firm pressure using your squeegee tool or fingertip to remove any air pockets/bubbles then peel straight back or roll transfer film to reveal finished decal.
- Handwashing is recommended.
Decals cannot be repositioned and are permanent!